Symbol SPS 3000 Series Quick Reference Manual page 11

Q u i c k
2. The iPAQ and SPS 3000 are joined when their expansion
connectors are fully engaged. (You will hear a slight click.)
To remove the SPS 3000, push up on the bottom of the iPAQ to
disengage the expansion connector, then slide the iPAQ off the
SPS 3000 sleeves.
When inserting the iPAQ and SPS 3000 into the cradle, ensure
that the retractable stabilizing arms located on the inside of the
cradle are extended. These will provide a secure fit between the
units. If the arms are not extended before inserting the iPAQ and
R e f e r e n c e
Expansion
Connectors
9