Connecting To The Mains Supply - JVC UX-D150 Instruction Manual

Connecting to the Mains Supply

• Ensure all audio connections of the unit are connected before connecting to the mains power socket.
• Make sure the mains plug is firmly inserted into the mains socket.
• To switch the unit off completely, remove the mains plug from the mains socket.
• Please turn the unit off completely to save energy when not in use.
• Use the mains cable as the disconnect device. The disconnect device shall remain readily operable.
Unwind the mains adapter cable to its full length. Connect the AC socket at the rear of the
main unit to mains plug to the mains socket.
Rear View of the Main Unit
AC 220-240V ~50/60Hz
To the mains
socket
13