Connecting to the Mains Supply
•
This unit is designed to operate with an AC 220-240V ~ 50/60Hz power supply.
•
Connecting the unit to any other power source may cause damage to the unit. Unwind
the mains cable to its full length. Connect the mains plug to a mains socket. Make sure
the mains plug is fully inserted into the mains socket. The unit is now connected and
ready to use.
•
To switch the unit off completely, remove the mains plug from the mains socket.
Rear View of the Right Speaker
• Ensure all connections are connected before connecting to the mains socket.
• Use the mains plug as the disconnect device. The disconnect device shall remain readily operable.
16
Rear View of the Main Unit
and the Amplifier
AC 220-240V~
50/60Hz
Rear View of the Left Speaker
To the mains socket