Programme Play; Using The Usb - JVC UX-D150 Instruction Manual

Programme Play

You can programme up to 20 tracks to play in any desired order.
1. Make sure the disc is inserted and in STOP mode.
2. Press PROGRAM to enter the programme mode. The display will show "001 P--01" and
"PROG".
3. Press ALBUM/PRESET
4. Press
5. Press PROGRAM to store.
6. Repeat steps 3-5 to programme more tracks.
7. Once it is completed, press the
8. Press once to stop the programme play. Press twice to clear programme.
Open the CD tray and close it again will cancel the program and erase the memory.

Using the USB

By connecting a USB mass storage device (including
USB flash memory, USB flash players or memory cards)
to this unit, you can enjoy the device's stored music
through the unit.
1. Insert the USB device's USB plug into the
socket at the front of unit.
2. Turn SOURCE dial on the unit or repeatedly press
CD/USB on the remote control to select the USB
source. The word "USB" will be showed on the
display.
3. All playback features are the same as if you
were playing an MP3/WMA CD.
• The player supports the USB music file format of MP3, WMA only.
• If your USB device is loaded with MP3 files but the display keeps showing 'NO MUSIC" on the display,
the format of your USB device might not be compatible with the unit.
• The unit cannot play WMA files protected by "DRM FILE".
• The unit can support USB devices with up to 64GB of memory.
• The unit may not be compatible with all USB devices, this is not an indication of a problem with the
unit.
24
/ to select desired folder (for MP3/WMA CDs or USB).
/ to select the desired track number.
button to start programme play.