Table of Contents
Advertisement
Daily Timer
You can use the setting timer to make the unit automatically turn on at a certain time
everyday from standby. When the setting timer is on, the timer indicator "
displayed. The clock must be correctly set for the timer to operate correctly.
1. In Standby mode, press and hold TIMER/SLEEP until "TIMER SET" scrolls across the
display. Then the system will switch to the last selected source.
2. Press VOL + / – or
3. Press TIMER/SLEEP, the hour indicator will blink.
4. Press VOL + / – or
5. Press TIMER/SLEEP, the minute indicator will blink.
6. Press VOL + / – or
7. Press TIMER/SLEEP, the volume indicator will flash.
8. Press VOL + / – or
9. Press TIMER/SLEEP to confirm. The display will show "
• To exit timer setting mode without storing, press the
• If no button is pressed in 90 seconds, the unit exits clock setting mode automatically.
• If DISC / USB source is selected and the audio cannot be played, TUNER is activated automatically.
• If TUNER / DAB source is selected, the sound level will fix on level 5 if the previous sound level is lower
than 5.
To Deactivate or Re-activate a Daily Timer
In Standby mode, repeatedly press TIMER/SLEEP on the remote control to activate or
deactivate the timer.
DAB Radio Operation
Turn the SOURCE dial on the unit or press FM/DAB repeatedly on the remote control to
select DAB source. The word "DAB" will be showed on the display.
1. If the unit is connected to the mains power and then switched on to DAB mode for the
first time, the unit will automatically start scanning. The display will show "SCANNING".
2. All the stations that have been found will be stored automatically. To explore the found
stations, press
3. To re-tune, press the SCAN/A-B button on the remote control to perform a quick scan
again.
/
repeatedly on the remote control to select a source.
/
to set the hour.
/
to set the minute.
/
to adjust the alarm volume.
/
and then press
".
button.
to confirm.
" will be
17
Hide quick links:
Advertisement
Table of Contents
