Datavideo Technologies will try to give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some information in this manual, from time to time, may not be correct or may be incomplete. This manual may contain typing errors, omissions or incorrect information.
This product should only be operated from the type of power source indicated on the marking label of the AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your local power company.
Page 4
“Do Not Remove” may expose you to dangerous voltage points or other risks, and will void your warranty. Refer all service issues to qualified service personnel. 13. Unplug this product from the wall outlet and refer to qualified service personnel under the following conditions: a.
Hard Drive, Solid State Drive, SD Card, USB Thumb Drive, Lighting, Camera module, PCIe Card are covered for 1 year. The three-year warranty must be registered on Datavideo's official website or • with your local Datavideo office or one of its authorized distributors within 30 days of purchase.
Disposal For EU Customers only - WEEE Marking This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
Introduction TLM-430, a TFT 4.3” LCD monitor with an enhanced tally light, is used for quick preview and look back of the video captured by cameras on the field. It features 480 x 272 LCD active matrix and selectable 4:3 &...
Connections & Control Front Panel V1 Source Button Selects Input source (CV1) V2 Source Button Selects Input source (CV2) MENU Brings up the on-screen menu (See Menu Options more details). UP / DOWN Navigates the on-screen menu.
ENTER Confirms new settings or returns to default. Note: Press ENTER key to set the aspect ratio to 16:9 or 4:3 when either CV1 or CV2 is connect an input source. Tally Dual color tally indicator. Rear Panel Composite Video Input (CV1 / CV2) BNC ports for analog (Composite) video inputs.
Page 10
DC-In Socket Connects the supplied 12V/4W to this socket. The connection can be secured by screwing the outer fastening ring of the DC In plug to the socket Tally In Inputs red and yellow tally signals to tally LED. Red: On-air Yellow: Standby Power Switch Switches the power ON / OFF.
Menu Options 1. OUTLINE FRAME • Press the MENU button to enter the MAIN MENU. • Press UP / DOWN button to move to OUTLINE FRAME option. • Press ENTER button enter the OUTLINE FRAME option. • Press UP / DOWN button to select the OUTLINE FRAME range (80, 90 or OFF). •...
It is our goal to make your products ownership a satisfying experience. Our supporting staff is available to assist you in setting up and operating your system. Please refer to our web site www.datavideo.com for answers to DATAVIDEO WORLDWIDE OFFICES common questions, support requests or contact your local office below.