Fan Speed Command - ATEN VM6404H User Manual

Fan Speed Command

To setup fan speed, use the following command:
Command + Speed Value + [Enter]
For example, to set the fans to operate at high speed, type:
fan high [Enter]
The following tables show the possible values for the Fan Speed command:
Command
Speed Value
Note: Each command string can be separated with a space.
The following table lists the available Fan Speed commands:
Command Speed Value
low
mid
high
auto
fan Fan Speed command
low Low speed
mid Standard speed
high High speed
auto Automatically detect the temperature
and activate a proper speed
Enter
low [Enter]
mid [Enter]
high [Enter]
auto [Enter]
Chapter 5. RS-232 Commands
Description
Description
Description
Set the fan speed to low
Set the fan speed to standard
Set the fan speed to high speed
Set the fan speed to auto
111