VM7804 / VM8804
4-Port HDMI Input/Output Board Quick Start Guide
VM7804 Front View
Hardware Review
VM7804 Front View
1. HDMI Input Ports
2. Audio Input Ports
3. Status LED
Hardware Setup
I/O Board Installation
1. (Optional) Power off the Modular Matrix switch.
Note: The Input/Output Boards are hot swappable.
2. On the rear of the VM1600 unscrew the two phillips head screws and
remove a back panel cover.
3. Slide the I/O board into the open slot on the VM1600 until it secures
in place.
Note: The upper four slots are for input boards; the lower four slots
are for output boards.
4. Tighten the screws on the I/O board to fasten it to the Modular Matrix
switch, until its secure.
5. Repeat the steps if you are installing more I/O boards.
6. Power on the Modular Matrix switch.
1
2
VM8804 Front View
3
VM8804 Front View
1. HDMI Output Ports
2. Audio Output Ports
3. Status LED
1
2
3