CM1942 User Manual
Mouse Port Switching
Mouse Port Switching allows you to switch ports using mouse wheel button
(clicked twice). For Mouse Port Switching to work, Mouse Emulation must be
enabled. To enable/disable mouse port switching, do the following:
1. Invoke HSM (see page 21).
2. Press [W].
Setting the PC Operation Mode
This hotkey allows you to switch between Single PC Mode and Dual PC Mode.
To switch the CM1942 to Dual PC Mode, do the following:
1. Invoke HSM (see page 21
2. Press [O] [Enter].
Note: This procedure is a toggle between the two operation modes. To
revert back to the Single PC Mode, go through the steps above.
N-Key Rollover Keyboard Supporting Function
To enable/disable N-key rollover keyboard supporting function, do the
following:
1. Invoke HSM (see page 21
2. Press [K] [Enter].
Boundless Switching
To enable or disable to toggle between the boundless switching, do the
following:
1. Invoke HSM (see page 21
2. Press [Y] [Enter].
Note: 1. This procedure is a toggle. To enable / disable the boundless
switching, repeat step 1 and 2.
2. The mouse emulation must be enabled for the boundless
switching to work, see Mouse Emulation Control, page 25.
26
).
).
).