Operation Mode; Edid - ATEN VM3200 User Manual

VM3200 / VM3250 User Manual

Operation Mode

The EDID, CEC, OSD, and Output Status features are adjusted from the
Operation Mode menu.
1: EDID Mode: Default
2: CEC
3: OSD
4: Output Status
EDID (extended display identification data) is used to apply a preset video
configuration (EDID Mode), which utilizes the best resolution across
different monitors.
Consumer Electronics Control (CEC) allows interconnected HDMI
devices to communicate and respond to one remote control.
The OSD, when enabled for a port, displays real-time port switching
information on the screen.
The Output Status shows whether the video/audio of an Output port is
turned on or off.

EDID

To adjust the EDID mode, do the following:
1. From the Operation page, press pushbutton 1 to access the EDID Mode
page:
1: EDID Mode: Default
2: CEC
3: OSD
4: Output Status
2. Press pushbuttons 1-4 to make your selection.
1: Port 1
2: Default (In use)
3: Remix
4: Customized
56
↓: Next
↓: Next