Remote Mount Configuration; Tools Required For Pm1200 Installations - Motorola PM1200 Installation Manual

1-2
1.2 Standard Configurations
1.2.1

Remote Mount Configuration

In the remote mount version, the transceiver and the control head are mounted separately in the
vehicle. The control head is mounted on a remote trunnion near the operator. The transceiver is
mounted by means of a trunnion or other mounting hardware. If the transceiver is located in a car
trunk, be sure that secure mounting and sufficient cooling are provided. Do not cover the transceiver
with baggage, blankets, etc. For details on these configurations, see
1.3

Tools Required for PM1200 Installations

October, 2007
Tool
RF cable tool
Roto-Torq adjustable torque driver
7mm Hex Nut driver
CR-V PH1 screwdriver
CR-V PH2 screwdriver
CR-V PH2 screw bit
Introduction: Standard Configurations
Section 2.2.1 on page
Part Number
HLN6695_
RSX4043_
-
-
-
-
2-6.
6880309U11