Standard Configurations: Radio Mounting
2.2.1.1.1 Transceiver Mounting
1. After selecting the mounting location, use the double-sided adhesive tape to temporarily hold
the mobile transceiver trunnion in place.
2. Drill the holes you have marked for permanent installation.
3. Secure the transceiver trunnion with the self-drilling screws provided (see
Figure
2-8).
4. Transceiver trunnion (HKLN4342_): See
vehicle using the screws provided, insert the radio into the trunnion. Secure the radio by
firmly installing the ten HSM4x8 SUS screws and FW4 AL plain washer provided.
Figure 2-8. 120W Radio Mounting into Screw-Mounted Trunnion
October, 2007
Figure
2-8. After mounting the trunnion to the
2-7
Figure 2-7
and
6880309U11