Terminal Descriptions - Johnson Controls GLAS Installation Instructions Manual

Terminal descriptions

Note: If you have only one R wire, connect to RC.
Note: If you are replacing an existing thermostat, remove any jumper wires between R
and RH or RC and RH.
Y First stage of cooling or first stage heat pump
Y2 Second stage of cooling command or second stage heat pump
W First stage of conventional heating or first stage auxiliary heat for heat pump
systems
W2 Second stage of conventional heating or second stage of auxiliary heat for heat
pump system
5
Preliminary - This is information may change
GLAS Smart Thermostat Installation Instructions
© 2017 Johnson Controls