Dialing On Receiving A Call - Motorola MTM800E Feature User Manual

3. The call ends after a pre-programmed time, or if you
press
There is no presence check for Private Calls in DMO. This
means you don't know whether the called party is available
when you starts the call.
Receiving a DMO Private Call
When a DMO Private Call is received,
the call is started immediately without
need to accept it by the called party.
1. Press PTT to talk back and start
talking.
2. The call ends after a pre-programmed
time, or if you press
If the called party presses
suspended for a specified time and in case the calling party is
still transmitting the call is joined again.

Dialing on Receiving a Call

Dialing process is not changed for the Group Call. Otherwise
display is changed accordingly to the incoming call type and
after the call display returns to where the dialing process was
left.
When an Emergency Call is received, then dialing is aborted
and Emgcy In Use display appears.
.
.
Prvt in Use
David
the DMO private call is
1234
63