Motorola MTM800E Feature User Manual page 191

Messages Message Description
Codeplug The message is displayed when the control head
setting Error: configured as Slave is connected to the Transceiver and
CH Role the control head configured as Master is connected as
Selection standalone (i.e. not to the Transceiver).
CH is powering
OFF
Standalone The message is displayed on Slave Control Head in
Mode Standalone mode.
Radio is
powered OFF
No available
services
Software Error: The message is displayed on Slave Control Head only
Incompatible when the software version is different than on Master.
SW ver.
No available
services
Dual CH Link The message is displayed when the connection
Error! between Control Heads is lost.
Verify cables
connection
WAP initiated The message is displayed on Slave when the Master
Not available on Control Head is using WAP.
this unit
End to abort the
operation
183