Motorola MTM800E Feature User Manual page 152

2. Type your User PIN
When the User PIN is highlighted press
Select and type your User PIN on the
next screen then press OK.
3. Logging
From this point the request to logon is
sent. You can stop the logging process
by pressing Cancel. When the logging
process ends the display is changed to
idle screen.
Color blue of the display is when the user is in full service mode.
In other case the greyscale screen is displayed.
User ID List
The user can check who was using this radio before, by
going to Menu > More > RUI > Log on > User ID. The
chronological list is displayed under the [New User ID].
Log Off
You can change the state that you are logged on by pressing
Menu > Setup > RUI > Log Off from the idle screen. The
radio prompts to accept log off state or to deny it (if you
selected it by mistake).
144
RUI Logon
Back
User ID:
_______M
e
Select
Cancel
User PIN
Ok
Cancel
Logging...