Ptt Double Push; Individual Call - Motorola MTM800E Feature User Manual

PTT Double Push

This feature, if enabled by your Service Provider, allows you
to send the tone when the radio is in idle or Group Call mode
by pressing PTT twice.
After the D-PTT tone is played, the user can press and hold
the PTT once again to get the permission to talk. Otherwise if
the user presses the PTT while the D-PTT tone is played, it is
ignored.
After D-PTT tone is sent keeping PTT pressed will result in
permission to talk. D-PTT tone is not audible on sending
radio.

Individual Call

Talk Group Dialing by Index
You can press Talk Group speed number then
the Talk Group. Press Attach to confirm.
Non-Emergency calls:
• Pressing PTT
If the call type is "Group" or Private", then pressing PTT
initiates Group or Private Simplex call accordingly. Otherwise
special indication is given to the user.
• Pressing Send key
If the call type is "PABX" or "Phone" or "Private", then
pressing Send initiates PABX or Phone or Duplex private call
accordingly. If not allowed a special indication is given to the
user.
to join
25