Attaching The Duct Connectors To The Exhaust Hose; Connecting The Duct Connector To The Unit - EdgeStar AP12000HS Owner's Manual

Attaching the Duct Connectors to the Exhaust Hose

5. Attach the connectors to the hose:
A. Extend the ends of the exhaust hose
B. Thread the duct connector on by turning it clockwise until it stops.
6. Roll the unit towards the window kit. Leave at least 20 inches between the unit and the wall.

Connecting the Duct Connector to the Unit

7. Align the slots on the duct connector to the tabs and snap it into the back of the unit.
7