Refrigerant Leak Detector; Main Features - LG PLD-RNV0S Installation Manual

Refrigerant Leak Detector

5. Refrigerant Leak Detector

Main Features

1. The refrigerant leak detector detects the concentration of refrigerant (R410A) in the air.
2. If the concentration of the refrigerant in the air exceeds 6000 ppm, the indoor unit buzzer, the
error indicator on the wired remote control, and the sensor alarm go off to alert the user of a
refrigerant leak.
3. To minimize a refrigerant leak, stop the operation of the indoor unit.
4. When the alarm of the refrigerant leak detector goes off, the user must ventilate until the alarm
is disabled. (Indoor Unit Buzzer and Sensor LED)
5. Call the service center after ventilation.
6000 ppm or more
• When the concentration of the refrigerant becomes high, you may suffocate due to a lack of
oxygen.
• Detect for only a refrigerant leak in the room where the product is installed.
Refrigerant Leak Detector
8
Calculate the cumulative average.
leak detection value.
Operate when
being detected.
≥6 000 ppm
Sensor LED blinks.
The indoor unit
buzzer goes off.
Remote Control Error
Indication (CH230)
Stop the indoor unit.
<Flowchart of Features of Leak Detector>
: Operate when being detected.
Under 6000 ppm
The blinking sensor
LED turns off.
The indoor buzzer
turns off.
Keep the state.