Installation Order - LG PLD-RNV0S Installation Manual

7. Installation Order

1. Affix the sensor protective case (backplate) firmly by using the set screws at a height of 300-
500 m from the floor.
<How to Fix Screws>
Do not install around the window or door. When it is installed, the refrigerant leak detector
may fail to detect gases.
Do not install at a location where an electrical outlet is located. (Due to a gap with the sensor
protective case (backplate), the cover may be bent.)
2. Keep the sensor affixed to the sensor protective case (backplate) firmly by using the provided
set screws.
<Installation Place>
<How to Fix Sensor>
Installation Order
300 ~ 500 mm
Installation Manual 11