Integra DRX-7.1 Basic Manual page 19

> Before Start > Part Names
CD
a Analog Audio Cable, b Digital Optical Cable
> Install > Initial Setup
b
a
OR
> Playback
4. Connect the Audio Component
Example of a connection with an audio component.
Connect a CD player using a digital optical cable or analog
audio cable. You can also connect a turntable that has an
MM-type cartridge to the PHONO jack.
0 If the turntable has a built-in audio equalizer, connect it to
an AUDIO IN jack other than the PHONO jack. Further, if
the turntable uses an MC type cartridge, install an audio
equalizer compatible with the MC type cartridge between
the unit and the turntable, then connect to any AUDIO IN
jack other than the PHONO jack.
If the turntable has a ground wire,
connect it to the GND terminal of this unit.
Turntable
> Advanced Manual
Troubleshooting | Supplementary Information, etc.
19
En