Din Rear-Mount (Method B) - Pyle PLTV165 Owner's Manual

INSTALLATION

DIN REAR-MOUNT (Method B)

3
5
1. Factory radio mounting bracket
2. Car radio mounting bracket
3. Screw
4. After aligning the car radio
mounting bracket with the factory
radio mounting bracket, tighten the
screws (5x5mm) at 2 places on
each side.
5. When fix the factory radio
mounting bracket with the screws,
use s standard-tipped screwdriver
to open the tabs of the car radio
mounting bracket to make them fit
into theholes in the factory radio
mounting bracket.
1
2
4
6