Strainer Installation - Westinghouse QL0193 Owner's Manual

Installation (continued)

STRAINER INSTALLATION

1 . Apply a ring of plumber's putty to the underside of the strainer
flange.
2 . Insert the strainer body into the sink .
3 . Assemble the rubber gasket, friction washer and locknut onto
the strainer body from under the sink .
4 . Hand tighten the locknut . Do not over tighten the locknut as it
may split or deform the strainer body .
7
Please contact customer.service@conglomkb.com or 1-877-333-0098 for further assistance .
Sealant
Basket
Strainer body
Rubber gasket
Friction washer
Locknut
CONGLOMKB .COM