Strainer Installation - Westinghouse QL064 Owner's Manual

Installation (continued)

STRAINER INSTALLATION

1 . Apply a ring of sealant to the underside of the
strainer flange.
2 . Insert the strainer body into the sink .
3 . Assemble the rubber gasket, friction washer and
locknut onto the strainer body from under the sink .
4 . Hand tighten the locknut . Do not over tighten locknut
as it may split or deform the body of the strainer .
QL064
8
Sealant
Basket
Strainer body
Rubber gasket
Friction washer
Locknut