Cabinet Installation - Westinghouse QL0193 Owner's Manual

Installation (continued)

CABINET INSTALLATION

Carefully check the utility sink for damage and/or missing parts prior
to installation . If there is any damage or if you are missing parts,
do not proceed with the installation . Report damage and/or missing
parts immediately to the manufacturer . Do not dispose of packaging
before you are satisfied with your new utility sink.
1 . The main cabinet (A) is preassembled . The sink (E) is shipped
inside the cabinet . The sink (E), faucet (B) and strainer assembly
(F) must be installed .
2 . Remove the sink (E) carefully from inside the cabinet (A), and
inspect for damage . If any damage is found please contact
customer service prior to the installation .
3 . Test the fit of the sink (E) on the cabinet (A), and note the final
position for your reference . Remove the sink and place upright
on a towel or piece of cardboard (see Fig . 1) .
A
QL0193
WARNING:
Always wear safety goggles and gloves during
installation .
E
Fig . 1
8