Charging; Connecting - Lowrance FishHunter 3D/PRO Operator's Manual

Charging

1.
2.
3.

Connecting

1.
2.
10 |
Locate the 3 pin charging port on
the bottom of the sonar. It is on the
opposite side from the tow point at the
back of the sonar
Push the USB cord into the bottom of
the sonar so that it is in snugly. You
must slide the charge cord past the
transducer on the bottom of the sonar
which makes it slightly difficult to get
the charge cord into the side of the
unit. This is the correct way to ensure a
good connection with your sonar.
Plug the USB cord into USB charger. A
red light will appear on the top of the
sonar and stay on until fully charged.
Download theFishHunter app from the Google play store
or iOS app store.
Create an account by opening the app and following the
steps on the screen. Be sure to do this before you leave
Overview | FishHunter 3D/PRO Operator Manual