ZyXEL Communications ALC1224 User Manual page 83

LABEL
RxPkts This field shows the number of packets received by this port on this individual channel since the
DSL connection was last established.
Errors This field shows the number of received errors on this port on this individual channel.
Tx B/s This field shows the number of bytes transmitted on a per-second basis by this port on this
individual channel.
Rx B/s This field shows the number of bytes received on a per-second basis by this port on this
individual channel.
Tx Cells This field shows the number of ATM cells transmitted by this port on this individual channel.
Rx Cells This field shows the number of ATM cells received by this port on this individual channel.
Up Time This field shows the total amount of time the line has been up.
Poll The field displays how often (in seconds) this screen refreshes. You may change the refresh
Interval(s) interval by typing a new number in the text box and then clicking Set Interval.
Stop Click Stop to halt system statistic polling on this card.
Start Port Use these fields to have the screen display channel statistics for a range of ports that you
specify.
End Port
Select a beginning port number in a range of ports in the Start Port field and an ending port
Set Range
number in the End Port field. Click Set Range to have the screen display channel statistics for
the range of ports that you specified.
Clear Click Clear to reset statistic records for the channels in the range selected in the Start Port to
End Port range channel.
7.2.4 VLAN Status Screen
Click Statistics in the navigation panel and then the ADSL line card's link in the Statistics screen.
Click VLAN Status in the card's Statistics screen to open the ALC 802.1Q VLAN Status screen.
Use the ALC 802.1Q VLAN Status screen to check status and membership data about the card's IEEE 802.1Q
VLANs.
Statistics
Table 7-4 ALC Channel Statistics
DESCRIPTION
ALC1224 User's Guide
7-7