ZyXEL Communications ALC1224 User Manual page 103

dot1x
config
maccount
command <slot> <subcommands>
Commands
Table 10-2 Engineer Shell Commands
COMMANDS
macfilter set <slot-port>
<mac>
macfilter delete <slot-port>
<mac>
macfilter list <slot>
maccount enable <slot-port>
maccount disable <slot-port> Turns off the MAC count filter.
maccount set <slot-port>
<count>
maccount list <slot>
enable
disable
list <slot>
port enable <slot-port>
disable <slot-port>
control <slot-port>
auto|auth|unauth
reauth <slot-port> on|off
period <slot-port> <seconds> Sets the 802.1X re-authentication period for
convert
active <slot>
inactive <slot>
set <slot> <count>
list
lineinfo <port>
lineperf <port>
loopback <port> <mode>
list port <port>
list ports
stat ch <port> <vpi> <vci>
ALC1224 User's Guide
DESCRIPTION
Adds a MAC filter MAC entry.
Removes a MAC filter MAC entry.
Displays the MAC filter settings.
Turns on the MAC count filter.
Sets the MAC count filter for a specific port.
Displays MAC count filter settings.
Turns on 802.1X for the whole system.
Turns off 802.1X for the whole system.
Displays 802.1X settings.
Turns on 802.1X for specific ports.
Turns off 802.1X for specific ports.
Sets the 802.1X port authentication option
for specific ports.
Sets the 802.1X re-authentication option for
specific ports.
specific ports.
Backward compatibility command.
Turns on a line card's MAC address count
filter.
Turns off a line card's MAC address count
filter.
Sets a line card's MAC address count filter.
Displays the system's current MAC address
count settings.
Sends commands to the line card in the
specified slot.
This command shows the statistics of the
specified DSL ports.
This command shows the line quality of the
specified DSL port.
Performs loopback test. <mode> = "local" or
"f5"
Displays line settings.
Displays line settings on all ports.
Displays channel status of all DSL lines.
10-7