ZyXEL Communications ALC1224 User Manual page 121

11.7.2 Dot1x Enable Command
Syntax:
lcman port dot1x enable <slot-port>
where
<slot-port> =
This command enables IEEE 802.1x on a specific port.
The following example turns on IEEE 802.1x for ADSL port 1 on the line card in slot 3.
ras> lcman port dot1x enable 3-1
11.7.3 Dot1x Disable Command
Syntax:
lcman port dot1x disable <slot-port>
where
<slot-port> =
This command turns off IEEE 802.1x on a specific port or on all ports if no port is specified.
The following example turns off IEEE 802.1x on ADSL port 1 on the line card in slot 3.
ras> lcman port dot1x disable 3-1
11.7.4 Dot1x Control Command
Syntax:
lcman port dot1x control <slot-port> <auto|auth|unauth>
where
<slot-port> =
<auto|auth|un
auth>
This command sets how the line card applies IEEE 802.1x on a specified port.
The following example sets the line card to authenticate all subscribers before they can access the network through
ADSL port 1 on the line card in slot 3.
ADSL Port Commands
The number of the slot where the ALC1224 is located and the number of an
ADSL port.
The number of the slot where the ALC1224 is located and the number of an
ADSL port.
The number of the slot where the ALC1224 is located and the number of an
ADSL port.
This field sets how the line card uses IEEE 802.1x. Use
=
subscribers before they can access the network through this port.
Use to allow all connected users to access the network through this port
auth
without authentication.
Use to deny all subscribers access to the network through this port.
unauth
ALC1224 User's Guide
to authenticate all
auto
11-17