ZyXEL Communications ALC1224 User Manual page 100

ALC1224 User's Guide
Command
<slot>
10-4
Table 10-1 Standard Shell Commands
COMMANDS
set <slot-port> <pvid> Sets a port's default priority.
priority
show <slot id>
set <slot-port>
<priority>
frametype show <slot>
set <slot-port>
<all|tag>
pktfilter show <slot>
set <slot-
port><params>
macfilter show <slot>
enable <slot-port>
disable <slot-port>
set <slot-port> <mac>
delete <slot-port>
<mac>
maccount show <slot>
enable <slot-port>
disable <slot-port>
set <slot-port>
<count>
isolate [enable|disable]
dot1x show <slot>
enable <slot-port>
disable <slot-port>
control <slot-
port><auto|auth|unauth
>
reauth <slot-
port><on|off>
period <slot-
port><seconds>
lineinfo <port>
DESCRIPTION
Displays port default priority settings.
Sets a port's default priority.
Displays the acceptable frame type settings
for the ports on a card.
Sets the acceptable frame type for a specific
port.
Displays packet type filter settings.
Sets the packet type filter for a specific port.
Displays MAC filter settings.
Turns on the MAC filter.
Turns off the MAC filter.
Adds a MAC filter MAC entry.
Removes a MAC filter MAC entry.
Displays the MAC count filter settings.
Turns on the MAC count filter.
Turns off the MAC count filter.
Sets the MAC count filter for a specific port.
Enables/disables port isolation.
Displays 802.1X settings.
Turns on 802.1X for specific ports.
Turns off 802.1X for specific ports.
Sets the 802.1X port authentication option
for specific ports.
Sets the 802.1X re-authentication option for
specific ports.
Sets the 802.1X re-authentication period for
specific ports.
Sends commands to the line card in the
specified slot.
This command shows the statistics of the
specified DSL ports.
Commands