Step - ADT Garda Response PM30 Reference Manual

Changing Code

Step 1

On the Main Panel press
the screen saver
Step 2
Press Next
Step 3
The display will show: 'User Settings'
Step 4
OK
Press
Step 5
Type in your Code
Step 6
The display will show: 'Set Zone Bypass'
Step 7
Next until you find 'User Codes'
Press
Step 8
Press OK
Step 9
The display will show the 'User 01
Step 10
(Next) until you find a user slot you want to change
Press
Step 11
Press OK
Step 12
The display will show: 'User ## : ####' (current code)
Step 13
Type in your new code and press
Step 14
The display will show: 'User 01 Code █',
Step 15
Your code has now been changed
Step 16
You can change more codes by repeating process from Step 10.
Step 17
To exit press the
Open Padlock and enter your master code to exit
Code █',
(locked padlock) and press
OK
9
OK