Step - ADT Garda Response PM30 Reference Manual

Adding Code

Step 1

On the Main Panel press
the screen saver
Step 2
Press
Step 3
The display will show: 'User Settings'
Step 4
OK
Press
Step 5
Type in your Code
Step 6
The display will show: 'Set Zone Bypass'
Step 7
Next until you find 'User Codes'
Press
Step 8
Press OK
Step 9
The display will show the 'User 01
Step 10
(Next) until you find a user slot without a square (i.e. 'User 02
Press
Code')
Step 11
OK
Press
Step 12
The display will show: 'User ## : 0000',
Step 13
Type in a new code and press
Step 14
The display will show: 'User 02
Step 15
You can add further codes by repeating process from Step 10.
Step 16
To exit press the
Open Padlock and enter your master code to exit
Code █',
Code █',
(locked padlock) and press
OK
7
OK