ADT Garda Response PM30 Reference Manual page 10

Bypass Zone
This function allows a user to temporarily disable a device/zone from the System
(for example, to disable a movement detector when a dog is left in the house). Zone
bypass last for a one set period only and automatically switches off when the System
in Unlocked.
Step 1
Close all doors (including your entry/exit door),
(Unlock)
Press
Step 2
If the panel shows 'Enter Code' type in CODE.
If the panel shows 'Ready' go to step 4.
Step 4
(Next)
Press
Step 5
The display will show: 'User Settings'
Step 6
Press
Step 7
Type in your CODE
Step 8
The display will show: 'Set Zone Bypass'
Step 9
Press
Step 10
The panel will show the first zone (i.e. Front door)
Step 11
If this zone is not the one you wish to bypass, press
zone is displayed
(OK)
(OK)
10
(Next) until the desired