Janome Stirling 8002D Instruction Manual page 21

⁄1
w
e
AFTER SALES SUPPORT
AUS 1300 526 663
AUS Hotline Costs
a
!1
s
q
⁄1 Pull the threader to pass the thread through the
hole of lower looper thread guide.
Remove the thread from the threader, and draw
the thread through the hole on the lower looper
10 cm (4˝) or more with a pair of tweezers.
* For threading without the looper threader, draw
the thread from the right side of lower looper
thread guide with a pair of tweezers.
* Draw the thread through the hole on the lower
looper 10 cm (4˝) or more with a pair of tweezers.
!1 Lower looper
a Looper threader
s Tweezers
NOTE:
How to thread woolly nylon/polyester thread.
* The illustration at left shows one of the easiest
ways to pass woolly nylon/polyester thread
through the lower looper.
q Lower looper
w Ordinary thread
e Woolly nylon/polyester thread
enquiries@esqaustralasia.com.au
MODEL: 8002D PRODUCT CODE: 52832 04/2016
21