Janome Stirling 8002D Instruction Manual page 20

v b
t
a
s
n m , .
o
i
⁄0
!0
a
s
AFTER SALES SUPPORT
1300 526 663
AUS
20
AUS Hotline Costs
r
y
u
s
v Insert the thread between tension discs from the
right. Then pull both sides of the thread firmly to
insert it between tension discs.
b Pass the thread through lower looper thread
guide.
r Lower looper thread tension dial
t Lower looper thread guide
* Make sure that the thread is between the tension
discs.
a Thread
s Tension discs
n Pass the thread through lower looper thread
guide.
m Pass the thread through the looper thread take-
up lever (lower).
, Pass the thread through lower looper thread
guide.
. Pass the thread through lower looper thread
guide.
y Lower looper thread guide
u Looper thread take-up lever (lower)
i Lower looper thread guide
o Lower looper thread guide
⁄0 Turn the handwheel toward you until the lower
looper comes to the right, and pass the threader
through the hole on lower looper thread guide.
Hook the end of the thread on the threader.
* Looper threader is optional.
* If you don't have the looper threader, turn the
handwheel towards you until the lower looper
comes to its most left position. Thread lower
looper thread guide from the left side with a pair
of tweezers. Then, turn the handwheel towards
you to move the lower looper to the right position.
!0 Lower looper thread guide
a Lower looper thread
s Looper threader
enquiries@esqaustralasia.com.au
MODEL: 8002D PRODUCT CODE: 52832 04/2016