Toyota LAND CRUISER 78 series Owner's Manual page 65

(c) Shifting procedure
(lever/button control type-
1FZ-FE and 1HD-FTE engines)
SHIFTING BETWEEN "H" AND "H4"
To shift from "H" to "H4", push in the
"H4" button with both the free-wheeling
hubs engaged, then release the accelera-
tor pedal momentarily.
This can be done at any vehicle speed.
You need not depress the clutch pedal.
Lt
CAUTION
• Never push the "H4" button if
wheels are slipping. Stop the slip-
ping or spinning before shifting.
• Never drive with only one hub en-
gaged.
To shift from "H4" to "H", push the "H4"
button again to turn it off. Disengage both
the free-wheeling hubs for continued "H"
use.
This can be done at any vehicle speed.
You need not depress the clutch pedal.
If the indicator light does not go off when
you push the "H4" button again to turn it
off, drive straight ahead while accelerating
or decelerating, or drive in reverse.
58
SHIFTING BETWEEN "H" OR "H4" AND
"L4"
To shift from "H" or "H4" and "L4",
stop the vehicle or reduce your speed to
less than 8 km/h (5 mph), depress the
clutch pedal and move the four-wheel
drive control lever with both the free-
wheeling hubs engaged.
If you cannot shift, drive the vehicle a
short distance forward or backward and
try again .
To shift from "L4" to "H4" or "H", de-
press the clutch pedal with your foot off
the accelerator pedal and move the four-
wheel drive control lever to the "H" posi-
tion.
This can be done at any vehicle speed.
If you cannot shift, drive the vehicle a
short distance forward or backward and
try again.
(c) Shifting procedure
(lever/button control type-
1HZ engine)
SHIFTING BETWEEN "H" AND "H4"
To shift from "H" to "H4", push in the
"H4" button with both the free-wheeling
hubs engaged, then release the accelera-
tor pedal momentarily.
This can be done at any vehicle speed.
You need not depress the clutch pedal.
&
CAUTION
• Never push the "H4" button if
wheels are slipping. Stop the slip-
ping or spinning before shifting.
• Never drive with only one hub en-
gaged.
To shift from "H4" to "H", push the "H4"
button again to turn it off. Disengage both
the free-wheeling hubs for continued "H"
use.
This can be done at any vehicle speed.
You need not depress the clutch pedal.
If the indicator light does not go off when
you push the "H4" button again to turn it
off, drive straight ahead while accelerating
or decelerating, or drive in reverse.
(c) Shifting procedure
(lever/button control type-
1FZ-FE and 1HD-FTE engines)
SHIFTING BETWEEN "H" AND "H4"
To shift from "H" to "H4", push in the
"H4" button with both the free-wheeling
hubs engaged, then release the accelera-
tor pedal momentarily.
This can be done at any vehicle speed.
You need not depress the clutch pedal.
Lt
CAUTION
• Never push the "H4" button if
wheels are slipping. Stop the slip-
ping or spinning before shifting.
• Never drive with only one hub en-
gaged.
To shift from "H4" to "H", push the "H4"
button again to turn it off. Disengage both
the free-wheeling hubs for continued "H"
use.
This can be done at any vehicle speed.
You need not depress the clutch pedal.
If the indicator light does not go off when
you push the "H4" button again to turn it
off, drive straight ahead while accelerating
or decelerating, or drive in reverse.
58
SHIFTING BETWEEN "H" OR "H4" AND
"L4"
To shift from "H" or "H4" and "L4",
stop the vehicle or reduce your speed to
less than 8 km/h (5 mph), depress the
clutch pedal and move the four-wheel
drive control lever with both the free-
wheeling hubs engaged.
If you cannot shift, drive the vehicle a
short distance forward or backward and
try again .
To shift from "L4" to "H4" or "H", de-
press the clutch pedal with your foot off
the accelerator pedal and move the four-
wheel drive control lever to the "H" posi-
tion.
This can be done at any vehicle speed.
If you cannot shift, drive the vehicle a
short distance forward or backward and
try again.
(c) Shifting procedure
(lever/button control type-
1HZ engine)
SHIFTING BETWEEN "H" AND "H4"
To shift from "H" to "H4", push in the
"H4" button with both the free-wheeling
hubs engaged, then release the accelera-
tor pedal momentarily.
This can be done at any vehicle speed.
You need not depress the clutch pedal.
&
CAUTION
• Never push the "H4" button if
wheels are slipping. Stop the slip-
ping or spinning before shifting.
• Never drive with only one hub en-
gaged.
To shift from "H4" to "H", push the "H4"
button again to turn it off. Disengage both
the free-wheeling hubs for continued "H"
use.
This can be done at any vehicle speed.
You need not depress the clutch pedal.
If the indicator light does not go off when
you push the "H4" button again to turn it
off, drive straight ahead while accelerating
or decelerating, or drive in reverse.