Toyota LAND CRUISER 78 series Owner's Manual page 64

If the indicator light does not go off when
you shift the four-wheel drive control lever
into "H2", drive straight ahead while accel-
erating or decelerating, or drive in re-
verse.
SHIFTING BETWEEN "H4" AND "L4"
To shift from "H4" to "L4", stop the
vehicle or reduce your speed to less than
8 kmjh (5 mph). With your foot off the
accelerator pedal, depress the clutch ped-
al and move the four-wheel drive control
lever while lifting it up.
To shift from "L4" to "H4", depress the
clutch pedal with your foot off the acceler-
ator pedal and move the four-wheel drive
control lever.
This can be done at any vehicle speed.
(c) Shifting procedure
(lever control type-
1HZ engine)
SHIFTING BETWEEN "H2" AND "H4"
To shift from "H2" to "H4", move the
four-wheel drive control lever with both
the free-wheeling hubs engaged.
This can be done at any vehicle speed.
You need not depress the clutch pedal. If
you have trouble shifting, depress or re-
lease the accelerator pedal momentarily
while pushing the four-wheel drive control
lever.
&
CAUTION
• Never move the four-wheel drive
control lever if wheels are slipping.
Stop the slipping or spinning before
shifting.
• Never drive with only one hub en-
gaged.
To shift from "H4" to "H2", simply move
the four-wheel drive control lever. Disen-
gage both the free-wheeling hubs for con-
tinued "H2" use.
This can be done at any vehicle speed.
You need not depress the clutch pedal.
If the indicator light does not go off when
you shift the four-wheel drive control lever
into "H2", drive straight ahead while accel-
erating or decelerating, or drive in re-
verse.
SHIFTING BETWEEN "H4" AND "L4"
To shift between "H4" and "L4", stop
the vehicle or reduce your speed to less
than 8 kmjh (5 mph). With your foot off
the accelerator pedal, depress the clutch
pedal and move the four-wheel drive con-
trol lever.
57
If the indicator light does not go off when
you shift the four-wheel drive control lever
into "H2", drive straight ahead while accel-
erating or decelerating, or drive in re-
verse.
SHIFTING BETWEEN "H4" AND "L4"
To shift from "H4" to "L4", stop the
vehicle or reduce your speed to less than
8 kmjh (5 mph). With your foot off the
accelerator pedal, depress the clutch ped-
al and move the four-wheel drive control
lever while lifting it up.
To shift from "L4" to "H4", depress the
clutch pedal with your foot off the acceler-
ator pedal and move the four-wheel drive
control lever.
This can be done at any vehicle speed.
(c) Shifting procedure
(lever control type-
1HZ engine)
SHIFTING BETWEEN "H2" AND "H4"
To shift from "H2" to "H4", move the
four-wheel drive control lever with both
the free-wheeling hubs engaged.
This can be done at any vehicle speed.
You need not depress the clutch pedal. If
you have trouble shifting, depress or re-
lease the accelerator pedal momentarily
while pushing the four-wheel drive control
lever.
&
CAUTION
• Never move the four-wheel drive
control lever if wheels are slipping.
Stop the slipping or spinning before
shifting.
• Never drive with only one hub en-
gaged.
To shift from "H4" to "H2", simply move
the four-wheel drive control lever. Disen-
gage both the free-wheeling hubs for con-
tinued "H2" use.
This can be done at any vehicle speed.
You need not depress the clutch pedal.
If the indicator light does not go off when
you shift the four-wheel drive control lever
into "H2", drive straight ahead while accel-
erating or decelerating, or drive in re-
verse.
SHIFTING BETWEEN "H4" AND "L4"
To shift between "H4" and "L4", stop
the vehicle or reduce your speed to less
than 8 kmjh (5 mph). With your foot off
the accelerator pedal, depress the clutch
pedal and move the four-wheel drive con-
trol lever.
57