Toyota LAND CRUISER 78 series Owner's Manual page 133

When storing the spare tire, put it in place
with the outer side of the wheel facing up.
Then secure the tire, taking care that the
tire goes straight up without catching on
any other part, to prevent it from flying
forward during a collision or sudden brak-
ing.
. - - - - Stopper bolt
2. Turn the hold-down nuts counterclock-
wise with the wheel nut wrench and
remove them.
When storing the spare tire, put it in place
and secure to prevent it from flying for-
ward during a collision or sudden braking.
Some models only-When reinstalling the
nut cover, put the nut cover on with the
key inserted in the cylinder. Remove the
key while pushing on the cylinder. Use the
nut lock only for the spare tire.
UNDERFRAME-MQUNTED TYPE
1. Remove the stopper bolt with the wheel
nut wrench.
2. Insert the end of the jack handle exten-
sion into the lowering screw and turn
it counterclockwise with the handle,
making sure the handle remains firmly
fitted onto the jack handle extension.
3. After the tire is lowered completely to
the ground, remove the holding brack-
et.
126
When storing the spare tire, put it in place
with the outer side of the wheel facing up.
Then secure the tire, taking care that the
tire goes straight up without catching on
any other part, to prevent it from flying
forward during a collision or sudden brak-
ing.
. - - - - Stopper bolt
2. Turn the hOld-down nuts counterclock-
wise with the wheel nut wrench and
remove them.
When storing the spare tire, put it in place
and secure to prevent it from flying for-
ward during a collision or sudden braking.
Some models only-When reinstalling the
nut cover, put the nut cover on with the
key inserted in the cylinder. Remove the
key while pushing on the cylinder. Use the
nut lock only for the spare tire.
UNDERFRAME-MQUNTED TYPE
1. Remove the stopper bolt with the wheel
nut wrench.
2. Insert the end of the jack handle exten-
sion into the lowering screw and turn
it counterclockwise with the handle,
making sure the handle remains firmly
fitted onto the jack handle extension.
3. After the tire is lowered completely to
the ground, remove the holding brack-
et.
126