Toyota LAND CRUISER 78 series Owner's Manual page 179

60~~O-OI
2. Loosen the retaining ring screws and
turn the ring counterclockwise. Take
out the beam unit together with the
ring, unplugging the connector.
If the connector is tight, wiggle it.
NOTICE
Never attempt to loosen the headlight
aim adjusting screws.
172
"TOP" mark
---:~~~~
60~~O-02
3. Install a new beam unit with the
"TOP" mark on the glass face up-
ward, plugging in the connector. Put
the ring on the unit, turn it clock-
wise and tighten the screws.
When aiming adjustment is necessary,
contact your Toyota dealer.
-Front turn signal and
parking lights
Use a Phillips-head screwdriver.
-------=::::::::::::::::::...l.....--
60~~O-OI
2. Loosen the retaining ring screws and
turn the ring counterclockwise. Take
out the beam unit together with the
ring, unplugging the connector.
If the connector is tight, wiggle it.
NOTICE
Never attempt to loosen the headlight
aim adjusting screws.
172
"TOP" mark
---:~~~~
60~~O-02
3. Install a new beam unit with the
"TOP" mark on the glass face up-
ward, plugging in the connector. Put
the ring on the unit, turn it clock-
wise and tighten the screws.
When aiming adjustment is necessary,
contact your Toyota dealer.
-Front turn signal and
parking lights
Use a Phillips-head screwdriver.
-------=::::::::::::::::::...l.....--