Maintenance - ECM Mechanika V Slim User Manual

7.4 Maintenance

(If you have any questions, please contact your specialised dealer.)
Replacing the group gasket and the shower screen (Group gasket and shower screen must be changed at the same
time)
1 Switch off the machine (power switch in position"0") and disconnect the power cord.
2 Open the steam valve and release the steam. Then close it again.
3 Let the machine cool down to room temperature.
Follow the steps as indicated below:
1
Brew group in the beginning.
4
Remove the shower screen and the
gasket completely.
7
Insert the shower screen into the
brew group.
User Manual MECHANIKA V SLIM
2
Use a flat screwdriver to pry out the
shower screen and the group gasket.
5
Keep the new spare parts ready at
hand (the rounded side of the group
gasket with ECM print faced
upwards to the brewing group).
8
Take the portafilter without filter.
24
3
The shower screen and the gasket
are now nearly removed.
6
Clean the group with a brush.
Lock the shower screen firmly into
the gasket.
9
Clamp the portafilter into the brew
group.
ENGLISH