7 Hardware Reference
7.1 JetCam unit Hardware Reference
This section provides information on JetCam camera unit hardware. It covers architecture, features
and pin assignments for various connectors.
7.1.1 JetCam unit LEDs
The JetCam unit has several status LEDs, as seen in Figure 6.
System
status LED
Link Status LEDs
Figure 6 : JetCam camera status LEDs
The System status LED, located on the back, always slow pulses in green while the system is ON.
While in firmware update mode, this LED slow pulses orange. In any case of system failure, the
LED will constantly light orange.
High Speed Camera User Guide
19