Palm TREO 800W User Manual page 18

2
S E T T I N G U P
1 Use one hand to press the Battery
door release, and use your other hand
to slide the battery door downward to
remove it from your smartphone.
2 If the battery is installed, remove it.
Slide your finger under the left side of
the battery (nearest the stylus) and lift
up to remove it.
It is easier to remove the battery if you first
TIP
remove the stylus from your smartphone.
3 With the metal contacts facing the
battery compartment, slide the SIM
card into the cutout in the lower-right
corner of the compartment until you
feel it snap into place. Align the notches
to make sure you have the card oriented
correctly.
10
I N S E R T I N G T H E S I M C A R D A N D B A T T E R Y
Battery door
release
4 Align the metal contacts on the battery
5 Slide the battery door back into place.
Notch
with the contacts inside the battery
compartment, insert the battery into the
compartment at a 45-degree angle, and
then press it into place.
Your smartphone screen turns on.
Wait for the progress bar to fill and the
Windows Mobile screen to appear.
®
Battery
contacts
Phone
contacts