Focusing And Zooming The Image; Turning Off The Projector - Proxima DP5500 User Manual

FOCUSING AND ZOOMING THE IMAGE

You can use the title screen that appears when you first start the projector to
make your focus and image size adjustments.
1 Press the ZOOM +/- key on the Control Panel or Remote Control to make
the image larger (+) or smaller (-).
NOTE: If you have a Cyclops interactive pointer system installed and you
change the image size, you will have to recalibrate the Cyclops camera.
2 Adjust the focus using the FOCUS +/- buttons on the Control Panel or
Remote Control.
Image Size
The size of the projected image will change as you move the projector closer
to the screen or adjust the zoom lens. The following table indicates the
minimum and maximum distance from the projector to the screen for most
standard size screens.
SCREEN SIZE

TURNING OFF THE PROJECTOR

1 Press and hold the STANDBY/ON key on the Control Panel for one
second to turn the lamp off. When using the remote control, press and
hold the STANDBY/ON key for two seconds.
2 The fan will stop about one minute later and the ON indicator will glow.
Turn the AC POWER switch off.
3-2 Chapter Three
DISTANCE FROM PROJECTOR TO SCREEN
MINIMUM
40 in.
60 in.
80 in.
100 in.
120 in.
150 in.
200 in.
MAXIMUM
53.9 in.
82.3 in.
111 in.
139 in.
168 in.
210 in.
281 in.
87.8 in.
134 in.
179 in.
224 in.
270 in.
338 in.
452 in.