Table of Contents
Advertisement
VGA Cable
To Computer In
Figure 2-9 VGA connections
1 Unplug the monitor cable from the computer.
2 Plug one end of the supplied VGA cable into the RGB IN 1 port on the
projector. Plug the other end of the VGA cable into the computer's Video
Out (VGA) port.
3 Connect your audio source to the AUDIO IN 1 port on the projector
(see page 2-10).
NOTE: If you are using a second computer video or audio source, plug their
outputs into the RGB IN 2 and AUDIO IN 2 connectors.
4 If you want to use an external monitor, connect the monitor cable to the
RGB OUT port of the projector.
5 Turn the projector on and press the STANDBY/ON key.
NOTE: An external monitor is not required to use the DP5500.
From
Monitor Out
Setting Up the Desktop Projector 5500
2-7
Advertisement
Table of Contents
