Proxima DP5500 User Manual page 23

Connecting the PC to the Projector Through the
CONTROL Port
You can connect the projector to a computer through the CONTROL port.
You can then use the joystick on your remote control as the computer's
system mouse (see page 3-8). Before you begin, make sure that the projector
and computer power is on and that the cables are securely connected.
NOTE: This CONTROL feature is only available for PCs.
Figure 2-17 The Control port
Connecting the Cyclops Interactive Pointer System
Use the CYCLOPS port to connect the projector and optional Cyclops
interactive pointer system to the computer. You can use the Cyclops system
to control your computer's on-screen mouse cursor.
Figure 2-18 The Cyclops port
The optional Cyclops interactive pointer system is shipped with its own
Installation and User's Guides. The Cyclops kit also includes extra cables to
connect the projector and the computer.
1 Connect one end of the appropriate serial cable to the projector's
CYCLOPS port.
2 Connect the other end of the cable to the computer:
• On a PC, connect the computer end to a Serial port.
• On a Macintosh, connect the computer end to an ADB connector.
Setting Up the Desktop Projector 5500 2-13