Service Processor Menu - Cisco C880 M5 Configuration Manual

4.4.4

Service processor menu

The Service processor menu opens if you choose (4) Service Processor from
the main menu.
Figure 17: Remote Manager: Service Processor menu
(1) Configure IP Parameters
Configure the IPv4/IPv6 address settings of the iRMC in a guided dialog. Refer
to section "Network Interface Setting" in the "Cisco C880 M5 User Interface
Guide" for details on the individual settings.
(2) List IP Parameters
Display the IP settings.
(3) Toggle Identify LED
Switch the C880 M5 identification LED on/off.
(4) Reset iRMC S5 (Warm reset)
Reset the iRMC. The connection is
closed. Only the interfaces are re-
initialized.
(5) Reset iRMC S5 (Cold reset)
Reset the iRMC. The connection is
closed. The entire iRMC is re-initialized.
It is recommended to reboot the server after a Reset iRMC S5 (Cold Reset) or
Reset iRMC S5 (Warm Reset).
Cisco C880 M5 Configuration Guide
4.4 Main menu
54