Server Troubleshooting; Server Configuration; Physical Specifications For The Cisco Ucs B200 M3; Obtaining Documentation And Submitting A Service Request - Cisco UCS B200 M3 Installation And Service Note

d) Verify that the following items are listed as Enabled:
• VT Support (default is Enabled)
• VT-d Support (default is Enabled)
• TPM Support
• TPM State
If VT Support and VT-d Support are not enabled, return to the Advanced tab, select Processor Configuration, and
then set Intel (R) VT and Intel (R) VT-d to Enabled.
e) Press F10 to save and exit.

Server Troubleshooting

For general troubleshooting information, see the

Server Configuration

Cisco UCS blade servers should be configured and managed using Cisco UCS Manager. For details, see the Configuration Guide
for the version of Cisco UCS Manager that you are using. The configuration guides are available at the following URL:
http://www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html

Physical Specifications for the Cisco UCS B200 M3

Specification
Height
Width
Depth
Weight

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly
What's New in Cisco Product
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be
delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS
version 2.0.
Follow Cisco UCS Docs on Twitter
Cisco UCS Manager Troubleshooting Reference
Documentation, which also lists all new and revised Cisco technical documentation.
to receive document update notifications.
Value
1.95 inches (50 mm)
8.00 inches (203 mm)
24.4 inches (620 mm)
15.0 lbs (6.8 kg)
The system weight listed here is an estimate for a fully configured
system and will vary depending on peripheral devices installed.
Guide.
25