Scci-Compliant Power On/Off Commands - Cisco C880 M5 Configuration Manual

The following sections describe the individual OEM-specific IPMI commands.
Description format
The OEM-specific IPMI commands contained in this chapter are described in the
format used by the IPMI standard for describing IPMI commands.
The IPMI standard describes the IPMI commands using command tables which
list the input and output parameters for each command.
You can find information on the IPMI standards on the Internet.
2.3.1

SCCI-compliant Power On/Off commands

01 15 - Get Power On Source
This command returns the reason for the most recent Power On. The possible reasons
are listed below.
Request Data
Response Data
Power on
Source
0x00
0x01
0x02
0x03
0x04
0x05
Cisco C880 M5 Configuration Guide
- B8 NetFnlLUN: OEM/Group
- 01 Cmd : Command Group Communication
1:3 80 28 00
4 15 Command specifier
- BC
- 01
1 Completion code
2:4 80 28 00
3 01
4 Power on Source:
Description
Software or command
Power switch (on the front panel or keyboard)
Automatic restart after an AC power failure
Clock or timer (hardware RTC or software timer)
Automatic restart after fan failure shutdown
Automatic restart after critical temperature shutdown
IANA-Enterprise-Number FTS, LS byte first
IANA-Enterprise-Number FTS, LS byte first
Data Length
Cause of last power on
2.3 Supported IPMI OEM Commands
15