Configuring The Lan Interface - Cisco C880 M5 Configuration Manual

3.5.1

Configuring the LAN interface

You can configure the iRMC's LAN interface using the UEFI setup utility:
1. Call the UEFI setup utility of the managed server.
2. Open the iRMC LAN parameter configuration menu:
Management – iRMC LAN Parameters Configuration
Figure 5: Management menu
3. In the Management LAN field, enter Enabled.
4. In the Management LAN Port field, enter Management.
5. Save the settings.
6. If you want to use console redirection on the iRMC, continue with configuring
text console redirection. For more information, refer to
console redirection" on page
Cisco C880 M5 Configuration Guide
For more information, refer to the "Cisco C880 M5 User Interface Guide"
and/or refer to the "Cisco C880 M5 BIOS Setup Guide".
34.
3.5 Configuration via UEFI setup utility
"Configuration via text
37