Lexus GX460 Manual page 661

After a fuse is replaced
■
If the lights do not turn on even after the fuse has been replaced, a bulb may
●
need replacement. (P. 664)
If the replaced fuse blows again, have the vehicle inspected by your Lexus
●
dealer.
If there is an overload in a circuit
■
The fuses are designed to blow before the entire wiring harness is damaged.
CAUTION
To prevent system breakdowns and vehicle fire
■
Observe the following precautions.
Failure to do so may cause damage, and possibly a fire or injury.
Never use a fuse of a higher amperage rating than indicated, or use any other
●
object in place of a fuse.
Always use a genuine Lexus fuse or equivalent.
●
Never replace a fuse with a wire, even as a temporary fix.
This can cause extensive damage or even fire.
Do not modify fuses or the fuse box.
●
NOTICE
Before replacing fuses
■
Have the cause of electrical overload determined and repaired by your Lexus
dealer as soon as possible.
GX460_U.S.A. (OM60G24U)
4-3. Do-it-yourself maintenance
4
661